Dry Mortar Machines / Dry Mix Mortar Plants With Advanced German Technology
Description of MG automatic dry mix plant:
The tower type Dry-Mix Mortar Plant equipment developed by MG was arranged top-and-down in line with production process. The energy consumption is relatively low and cover small space. Small cross-contamination for raw materials, grand appearance, suit to produce the ordinary and special mortar. The dry mix mortar mixing plant control system developed by MG, which uses the Siemens PLC and Advantech industry computer, high-speed and high-precision weighing units and international famous low-voltage electrical components.
The Configuration of Dry Mix Plant:
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
Advantages of Dry Mix Mortar Plants:
- Reduced shrinkage cracks through better cement hydration
- No delaminating or pop-out on smooth or concrete surface due to very good bond strength
- Good workability and sag resistance
- Very good compressive flexural and tensile strength than ASTM standard values
- Good water resistance property
- Better flexibility
- Consistent quality
| - Easy to mix and apply
- Better finish and surface appearance
- Almost nil wastage of the material at site
- Minimum space required for the storage
- Inventory cost saving
- No multiple raw material(sand, cement and additives)
- Minimum supervision requires
|
Dry Mortar Products:
- External plaster
- Sand based internal plaster
- Brick joining mortar
- Tile adhesives
- Repair mortar
- Water proofing mortar
| - Grouts
- Floor screeds
- Bonding mortar
- Wall putty
- Gypsum based internal plaster
|
MG dry mix plant working site:
